Servo drives are an important component of modern motion control and are widely used in automation equipment such as industrial robots and CNC machining centers. In particular, servo drives used to control AC permanent magnet synchronous motors have become a research hotspot both domestically and internationally. Currently, AC servo drive designs commonly employ a three-loop control algorithm based on vector control for current, speed, and position. The proper design of the speed loop in this algorithm plays a crucial role in the performance of the entire servo control system, especially in terms of speed control.
In the speed loop of a servo drive, the accuracy of real-time motor rotor speed measurement is critical for improving the dynamic and static characteristics of the speed control loop. To balance measurement accuracy and system cost, incremental photoelectric encoders are generally used as speed sensors, and the corresponding commonly used speed measurement method is the M/T method. Although the M/T method offers a certain level of measurement accuracy and a wide measurement range, it has inherent drawbacks, mainly including: 1) at least one complete encoder pulse must be detected within the speed measurement cycle, limiting the lowest measurable speed; 2) it is difficult to strictly synchronize the two control system timers used for speed measurement, making it impossible to guarantee measurement accuracy in situations with large speed variations. Therefore, traditional speed loop designs using this speed measurement method struggle to improve the speed tracking and control performance of the servo drive.

